For years there was just one single trustworthy solution to keep data on a pc – having a disk drive (HDD). Then again, this kind of technology is actually expressing its age – hard drives are actually loud and slow; they are power–ravenous and tend to produce a great deal of heat during intense operations.

SSD drives, however, are swift, consume far less energy and are far less hot. They furnish an exciting new approach to file accessibility and data storage and are years in front of HDDs in terms of file read/write speed, I/O efficiency and then energy efficiency. Figure out how HDDs fare up against the modern SSD drives.

1. Access Time

Image

SSD drives provide a brand new & ground breaking method of data storage according to the usage of electronic interfaces in lieu of any moving components and revolving disks. This new technology is faster, making it possible for a 0.1 millisecond file accessibility time.

Image

The technology powering HDD drives goes all the way back to 1954. And even while it’s been considerably refined over the years, it’s nevertheless can’t stand up to the ingenious technology behind SSD drives. Through today’s HDD drives, the very best data access rate you’re able to reach can vary somewhere between 5 and 8 milliseconds.

2. Random I/O Performance

Image

Caused by the brand–new significant data file storage technique incorporated by SSDs, they provide faster file access rates and quicker random I/O performance.

During our trials, all SSDs confirmed their capacity to work with no less than 6000 IO’s per second.

Image

During the very same lab tests, the HDD drives demonstrated that they are significantly slower, with simply 400 IO operations addressed per second. Even though this may seem like a large amount, for people with a busy web server that serves a lot of famous web sites, a sluggish disk drive may result in slow–loading sites.

3. Reliability

Image

The lack of moving elements and rotating disks within SSD drives, and the recent advancements in electric interface technology have ended in a substantially reliable file storage device, with a normal failing rate of 0.5%.

Image

HDD drives use spinning disks for storing and browsing info – a technology since the 1950s. Along with hard disks magnetically suspended in mid–air, rotating at 7200 rpm, the prospects of one thing going wrong are much higher.

The average rate of failure of HDD drives varies among 2% and 5%.

4. Energy Conservation

Image

SSDs don’t have any moving elements and need almost no chilling power. In addition, they call for not much energy to perform – trials have demonstrated they can be operated by a regular AA battery.

As a whole, SSDs take in somewhere between 2 and 5 watts.

Image

HDD drives can be well known for becoming noisy; they can be at risk from getting hot and when there are several hard drives within a hosting server, you must have an extra a / c device just for them.

As a whole, HDDs take in somewhere between 6 and 15 watts.

5. CPU Power

Image

As a result of SSD drives’ higher I/O effectiveness, the main web server CPU can work with data file demands faster and preserve time for other functions.

The regular I/O delay for SSD drives is exactly 1%.

Image

HDD drives accommodate slower accessibility speeds rather than SSDs do, which will result in the CPU having to delay, whilst reserving resources for your HDD to find and return the requested data.

The standard I/O wait for HDD drives is just about 7%.

6.Input/Output Request Times

Image

In real life, SSDs function as admirably as they did for the duration of the tests. We ran an entire platform back up using one of the production machines. Over the backup process, the standard service time for any I/O demands was indeed under 20 ms.

Image

With the exact same hosting server, but this time loaded with HDDs, the end results were completely different. The standard service time for any I/O call fluctuated between 400 and 500 ms.

7. Backup Rates

Image

Talking about back ups and SSDs – we have found a great advancement in the data backup rate as we switched to SSDs. Currently, a regular web server backup takes only 6 hours.

Image

We used HDDs exclusively for quite a while and we have now great knowledge of how an HDD runs. Creating a backup for a server equipped with HDD drives is going to take about 20 to 24 hours.

Our Linux VPS hosting packages and also the typical Linux shared hosting packages accounts offer SSD drives by default. Be a part of our family here, at BigManHosting.com, and find out the way we can assist you boost your site.

  • Service guarantees

  •  
  • Subscribe now. There won’t be any configuration costs and you will have complete admin access to the server. 99.9% network availability is warranted.

  • Compare our prices

  •  
  • Examine the instruments and parameters coming with our Virtual Private Servers. You can start off with a cheaper VPS Hosting package and move up with simply a click as your demands expand.
  • Compare our hosting plans

  • Contact Us

  •  
  • You can easily get in touch with us 24/7/365 by email or by utilizing our ultra–fast ticketing platform. We offer a 1–hour reply time guarantee.